Is There a Recommended Wood Bleach For Briar?

Pipe and other hardware related discussions
Post Reply
User avatar
Goose55
Del's Love Child
Del's Love Child
Posts: 3402
Joined: Thu Feb 11, 2016 6:44 pm
Location: Southern Arizona, U.S.A.

Is There a Recommended Wood Bleach For Briar?

Post by Goose55 » Sun Jun 18, 2017 3:07 pm

Is there a recommended wood bleach for briar? I searched the library, and may have missed it, but I did not find anything on wood bleach.

I have this Barnett & Bickley English pipe (below) I am restoring, and I want to get rid of the red stain. From the rim, it looks like there is some cross grain, which would mean that there may be a lot of birds eye in the bowl. That is end grain, so it may be impossible to strip. I have tried stripping with no success.

Anyone had any success lightening briar with wood bleach?

Image
"At present we're on the wrong side of the door. But all the pages of the New Testament are rustling with the rumor that it will not always be so." ~ C.S. Lewis

User avatar
JudgeRusty
Didn't even get to wear his hat
Didn't even get to wear his hat
Posts: 5203
Joined: Tue Dec 13, 2011 6:00 pm
Location: VA

Re: Is There a Recommended Wood Bleach For Briar?

Post by JudgeRusty » Sun Jun 18, 2017 3:10 pm

No.










_
Though I speak with the tongues of men and of angels, but have not love, I have become sounding brass or a clanging cymbal

User avatar
Rusty
Slightly Impudent, Disciple of Del, Wannabe Catholic
Slightly Impudent, Disciple of Del, Wannabe Catholic
Posts: 24415
Joined: Thu May 01, 2008 6:00 pm
Location: Beelzebub's Rare Tobacco Emporium

Re: Is There a Recommended Wood Bleach For Briar?

Post by Rusty » Sun Jun 18, 2017 3:18 pm

You can try this site - https://dadspipes.com/author/lemoncrmobile/
His restorations sometimes look a little lighter than they should. And he often restains.

The stain penetrates the briar. Sometimes it goes all the way through and it appears on the chamber wall. This is the function of the briar root so it's not so surprising. Those chamber walls then have a uniform bowl coating applied.

So bleaching it may not work, because it penetrates the briar.
Oh Hillary... You abandon us to this?

Image

User avatar
coco
Uniquely Duggish
Uniquely Duggish
Posts: 26689
Joined: Sun Feb 01, 2009 6:00 pm
Location: Sweet Home Alabama
Contact:

Re: Is There a Recommended Wood Bleach For Briar?

Post by coco » Sun Jun 18, 2017 3:40 pm

The Arizona sun and some patience?

Wood bleach has been around for quite some time, and was used quite a bit in 50's furniture. Here is an article on it. I am not aware of anyone ever trying it on briar. You might be the first, setting the next big trend in the pipemaking world. On the other hand, it involves some dangerous chemicals, so you might want to avoid it. At the very least, make sure you cork the chamber well before bleaching.
Image
"Like a gold ring in a pig's snout is a cob with a forever lucite stem." (Pipverbs 1:1)

User avatar
Winton
Pastor
Pastor
Posts: 823
Joined: Sat Jun 21, 2014 3:23 pm

Re: Is There a Recommended Wood Bleach For Briar?

Post by Winton » Sun Jun 18, 2017 4:37 pm

A quick solution would be about 5 seconds on a belt sander to remove the stained wood. Obviously, this will lower the height of the pipe. This might be a very bad idea. Try if first with a pipe you don't care about.

User avatar
A_Morley
Cardinal Uncle Nacho
Cardinal Uncle Nacho
Posts: 10029
Joined: Fri May 05, 2006 6:00 pm
Location: Portland, Oregon

Re: Is There a Recommended Wood Bleach For Briar?

Post by A_Morley » Sun Jun 18, 2017 4:41 pm

You are a menace to society.
His Eminence
Cardinal of CPS

User avatar
Goose55
Del's Love Child
Del's Love Child
Posts: 3402
Joined: Thu Feb 11, 2016 6:44 pm
Location: Southern Arizona, U.S.A.

Re: Is There a Recommended Wood Bleach For Briar?

Post by Goose55 » Sun Jun 18, 2017 7:56 pm

I was reading in another forum something about Oxalic (sp) acid.

But I think I will just keep the remnants of the red stain. I did get some off the surfaced of the sand blast. Also been thinking of a polyurethane satin finish.

It's the curse of the cross grain I think this pipe has. Come with my liking sandblasted and rusticated pipes (I only own one smooth finish pipe, and it is partially rusticated). Often pipes are rusticated and sandblasted to hide crappy grain.

I was hoping it was not so, and that this might have been an old pipe back in teh days when prime briar was widely available and cheap.

So, the hunt goes on. I will be back on Ebay tomorrow looking for another pipe, and also give this one maybe it's first bowl of GH Brown Flake
"At present we're on the wrong side of the door. But all the pages of the New Testament are rustling with the rumor that it will not always be so." ~ C.S. Lewis

User avatar
hugodrax
Legal Artisan
Legal Artisan
Posts: 12778
Joined: Fri Jan 25, 2013 6:00 pm
Location: Pittsburgh, Pennsylvania
Contact:

Re: Is There a Recommended Wood Bleach For Briar?

Post by hugodrax » Sun Jun 18, 2017 8:06 pm

Curse of cross grain? You might not find cross grain or guinea grain aesthetically pleasing, and that is simple de gustibus and all that, but if you believe a pipe with cross grain smokes poorly simply because of the alignment of the grain, I'm deeply concerned that you've been resting your head in the Arizona sun next to your stummels. Please, please tell me you will wear a hat from now on. I'm worried about you, buddy.

User avatar
Rusty
Slightly Impudent, Disciple of Del, Wannabe Catholic
Slightly Impudent, Disciple of Del, Wannabe Catholic
Posts: 24415
Joined: Thu May 01, 2008 6:00 pm
Location: Beelzebub's Rare Tobacco Emporium

Re: Is There a Recommended Wood Bleach For Briar?

Post by Rusty » Sun Jun 18, 2017 8:12 pm

Goose55 wrote:
Sun Jun 18, 2017 7:56 pm
I was reading in another forum something about Oxalic (sp) acid.

But I think I will just keep the remnants of the red stain. I did get some off the surfaced of the sand blast.
Hooray. He pulls back from destruction.
Goose55 wrote:
Sun Jun 18, 2017 7:56 pm
Also been thinking of a polyurethane satin finish.
Boooo! Use highly dilute Shellac if you have to do this. Never Polyurethane.

Wasn't it you that wanted to remove the finish of a pipe because you thought it had troubles breathing?
Goose55 wrote:
Sun Jun 18, 2017 7:56 pm
It's the curse of the cross grain I think this pipe has. Come with my liking sandblasted and rusticated pipes (I only own one smooth finish pipe, and it is partially rusticated). Often pipes are rusticated and sandblasted to hide crappy grain.
With that amount of cake it wasn't cursed. Whether it is now is dependent upon your actions.
Goose55 wrote:
Sun Jun 18, 2017 7:56 pm
I was hoping it was not so, and that this might have been an old pipe back in teh days when prime briar was widely available and cheap.

So, the hunt goes on. I will be back on Ebay tomorrow looking for another pipe, and also give this one maybe it's first bowl of GH Brown Flake
The previous smoker liked it fine.

What has got you buying pipes again?
Oh Hillary... You abandon us to this?

Image

User avatar
philofumo
BROTHERSMOKE, Bizarrely Packaged Wealth of Information
BROTHERSMOKE, Bizarrely Packaged Wealth of Information
Posts: 919
Joined: Thu Sep 05, 2013 6:00 pm
Location: NW Georgia, USA

Re: Is There a Recommended Wood Bleach For Briar?

Post by philofumo » Sun Jun 18, 2017 8:14 pm

Image
It's the curse of the cross grain I think this pipe has.
Image

User avatar
Goose55
Del's Love Child
Del's Love Child
Posts: 3402
Joined: Thu Feb 11, 2016 6:44 pm
Location: Southern Arizona, U.S.A.

Re: Is There a Recommended Wood Bleach For Briar?

Post by Goose55 » Sun Jun 18, 2017 9:50 pm

Goose55 wrote:
Sun Jun 18, 2017 7:56 pm
Also been thinking of a polyurethane satin finish.
Boooo! Use highly dilute Shellac if you have to do this. Never Polyurethane.
Rusty wrote:
Sun Jun 18, 2017 8:12 pm
Wasn't it you that wanted to remove the finish of a pipe because you thought it had troubles breathing?
Yes, and I still think about that. Wish I had some Carnuba wax, but how would it be applied to sandblasted wood?
Goose55 wrote:
Sun Jun 18, 2017 7:56 pm
I was hoping it was not so, and that this might have been an old pipe back in teh days when prime briar was widely available and cheap.

So, the hunt goes on. I will be back on Ebay tomorrow looking for another pipe, and also give this one maybe it's first bowl of GH Brown Flake
Rusty wrote:
Sun Jun 18, 2017 8:12 pm
The previous smoker liked it fine.

What has got you buying pipes again?
I only like three of the pipes I have, and with summer, I have stopped smoking Nightcap, so that narrows it to two Need more pipes. But NOT 150 as I have seen some collect.
"At present we're on the wrong side of the door. But all the pages of the New Testament are rustling with the rumor that it will not always be so." ~ C.S. Lewis

User avatar
Jocose
a large Chinese man named Wu
a large Chinese man named Wu
Posts: 19276
Joined: Fri Jan 11, 2008 6:00 pm
Location: Moonbase Alpha
Contact:

Re: Is There a Recommended Wood Bleach For Briar?

Post by Jocose » Sun Jun 18, 2017 10:24 pm

"Wood Bleach" ?

I'm now certain that Goose is a troll and or a sock.
"And for Freds sake, DO NOT point anyone towards CPS or you'll put them off of both Christianity and pipe smoking forever." ~ FredS

I've crossed the Bosphorus.

User avatar
Rusty
Slightly Impudent, Disciple of Del, Wannabe Catholic
Slightly Impudent, Disciple of Del, Wannabe Catholic
Posts: 24415
Joined: Thu May 01, 2008 6:00 pm
Location: Beelzebub's Rare Tobacco Emporium

Re: Is There a Recommended Wood Bleach For Briar?

Post by Rusty » Mon Jun 19, 2017 12:20 am

Goose55 wrote:
Sun Jun 18, 2017 9:50 pm
Goose55 wrote:
Sun Jun 18, 2017 7:56 pm
Also been thinking of a polyurethane satin finish.
Boooo! Use highly dilute Shellac if you have to do this. Never Polyurethane.
Rusty wrote:
Sun Jun 18, 2017 8:12 pm
Wasn't it you that wanted to remove the finish of a pipe because you thought it had troubles breathing?
Yes, and I still think about that. Wish I had some Carnuba wax, but how would it be applied to sandblasted wood?
Goose55 wrote:
Sun Jun 18, 2017 7:56 pm
I was hoping it was not so, and that this might have been an old pipe back in teh days when prime briar was widely available and cheap.

So, the hunt goes on. I will be back on Ebay tomorrow looking for another pipe, and also give this one maybe it's first bowl of GH Brown Flake
Rusty wrote:
Sun Jun 18, 2017 8:12 pm
The previous smoker liked it fine.

What has got you buying pipes again?
I only like three of the pipes I have, and with summer, I have stopped smoking Nightcap, so that narrows it to two Need more pipes. But NOT 150 as I have seen some collect.
First a caveat; I'm not a pipe maker. But carnuba wax is really for smooth clear finished pipes. And in any case it dissipates in the first smoke because of the heat. What was very shiny will have a nice matte finish after the first smoke. The guy at Dad's was applying mineral oil on some of them but I'm skeptical of its use. Bees wax would last longer than carnuba wax too. But try to avoid applying glue for dirt and dust. With textured surfaces there is lots of surface to hold dirt and patina anyway. You can just rely on your hands to do all of this and the surface will acquire a ruddy colour depending upon the characteristics of the oils on your hands anyway. A periodic brushing with a nylon brush cleans up rough finished surfaces quite well. You'd be surprised how dirty they can get. If you need more cleaning use some dilute Murphy's wood soap and the nylon brush again. Some of the pipe makers will use Shellac on blasted pipes to preserve the surface finish. On rusticated pipes it's not necessary. Many rusticated and blasted pipes have a two-tone staining. It's usually black over red or orange. The hands wear away the black over time and you get red/orange highlights on high areas in the finish.
Oh Hillary... You abandon us to this?

Image

User avatar
hugodrax
Legal Artisan
Legal Artisan
Posts: 12778
Joined: Fri Jan 25, 2013 6:00 pm
Location: Pittsburgh, Pennsylvania
Contact:

Re: Is There a Recommended Wood Bleach For Briar?

Post by hugodrax » Mon Jun 19, 2017 6:56 am

Jocose wrote:
Sun Jun 18, 2017 10:24 pm
"Wood Bleach" ?

I'm now certain that Goose is a troll and or a sock.
Neither. I'll vouch for Goose.

Now, if you asked me whether he was crazy, you might could get a different response. But I still love him.

User avatar
DepartedLight
That boy's got a Thorazine deficiency.
Posts: 24742
Joined: Thu Nov 19, 2009 6:00 pm
Location: Central North Carolina

Re: Is There a Recommended Wood Bleach For Briar?

Post by DepartedLight » Mon Jun 19, 2017 7:11 am

JudgeRusty wrote:
Sun Jun 18, 2017 3:10 pm
No.










_
DL Jake

All my posts should be viewed from a position of, this guy is nuts.

TheImpudent just gave me a wedgie. » John-Boy

User avatar
wosbald
What's the funny part?
What's the funny part?
Posts: 17276
Joined: Mon Feb 25, 2008 6:00 pm
Location: Cleveland, Ohio
Contact:

Re: Is There a Recommended Wood Bleach For Briar?

Post by wosbald » Mon Jun 19, 2017 7:19 am

+JMJ+
hugodrax wrote:
Mon Jun 19, 2017 6:56 am
Jocose wrote:
Sun Jun 18, 2017 10:24 pm
"Wood Bleach" ?

I'm now certain that Goose is a troll and or a sock.
Neither. I'll vouch for Goose.

Now, if you asked me whether he was crazy, you might could get a different response. But I still love him.
Image




"In the end, My Immaculate Heart will triumph." - Our Lady of Fatima

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests