What Are You Working On?

[FredS]

Patching leaky waders.

Let me know how it went . . .
Once my waders start leaking, it seems like a losing battle.

I should have started on the inside. The outside patches look like I sat on a rubber cement bomb but I got the hang of it by the time I moved to the inside.

A new pair will be on my winter shopping list. I've been averaging 3 fishing trips a week since April so its probably time to drop the dough for some Simms G3's.

[Goose55]

Patching leaky waders.

Let me know how it went . . .
Once my waders start leaking, it seems like a losing battle.

I should have started on the inside. The outside patches look like I sat on a rubber cement bomb but I got the hang of it by the time I moved to the inside.

A new pair will be on my winter shopping list. I've been averaging 3 fishing trips a week since April so its probably time to drop the dough for some Simms G3's.

I was curious about those and was astounded that they are about $500

[FredS]

Patching leaky waders.

Let me know how it went . . .
Once my waders start leaking, it seems like a losing battle.

I should have started on the inside. The outside patches look like I sat on a rubber cement bomb but I got the hang of it by the time I moved to the inside.

A new pair will be on my winter shopping list. I've been averaging 3 fishing trips a week since April so its probably time to drop the dough for some Simms G3's.

I was curious about those and was astounded that they are about $500

$300 for the waders. $200 for the street cred.

Like a pair of Air Jordan's on an urban basketball court.

[Hovannes]

I'm wondering if it's worth the effort to sand down and refinish an old wood cutting board that's gotten splintery.

[FredS]

Putting a receiver hitch and trailer wiring harness on da jeep.

[Hovannes]

Cutting rebar into 62 pieces, 2-1/2' long to spike down a mess of landscape timbers

[FredS]

Putting a receiver hitch and trailer wiring harness on da jeep.

Easiest job ever. 45 minutes total and probably 10 minutes of that was looking for an 18mm socket and 1/2" torque wrench. Finally gave up on looking for the torque wrench and just guesstimated with a foot long cheater pipe.

[Goose55]

I'm working on thinking about eradicating the weeds in my backyard.

[FredS]

Building a spreadsheet to record maint and mods on the Jeep. The google machine didn't return any of the shelf templates so I'll do it myself.

[Cleon]

Loaded up a stinky, bloated, bug-filled, and very dead raccoon that the kids found in our back yard and dropped its carcass off in a county road side ditch.

[Goose55]

Had to mix up 2 gallons of an organic Vinegar weed killer my neighbor gave me the recipe for, for my pea gravel backyard was turning into a meadow with all the rain we've had. Over 5 inches since July 1st. The vinegar/ Epson salt concoction works even better, with the Dawn dish soap as a surfactant and the weeds staying wet w/ our dew point and humidity off the charts. I have a Stihl blower/ mister and made quick work of it in 10 minutes. But I'm keeping it handy as I may need to repeat the application.

[coco]

Had to mix up 2 gallons of an organic Vinegar weed killer my neighbor gave me the recipe for, for my pea gravel backyard was turning into a meadow with all the rain we've had. Over 5 inches since July 1st. The vinegar/ Epson salt concoction works even better, with the Dawn dish soap as a surfactant and the weeds staying wet w/ our dew point and humidity off the charts. I have a Stihl blower/ mister and made quick work of it in 10 minutes. But I'm keeping it handy as I may need to repeat the application.

It works for everything.

[Goose55]

Had to mix up 2 gallons of an organic Vinegar weed killer my neighbor gave me the recipe for, for my pea gravel backyard was turning into a meadow with all the rain we've had. Over 5 inches since July 1st. The vinegar/ Epson salt concoction works even better, with the Dawn dish soap as a surfactant and the weeds staying wet w/ our dew point and humidity off the charts. I have a Stihl blower/ mister and made quick work of it in 10 minutes. But I'm keeping it handy as I may need to repeat the application.

It works for everything.

Even nasty looking shank brushes!

[JMG]

I really hope I finish this dumb fence tomorrow. Here's a bunch of before and "almost done" afters...

[JimVH]

I really hope I finish this dumb fence tomorrow. Here's a bunch of before and "almost done" afters...

That's a big job, especially short handed. It looks great.

[coco]

I really hope I finish this dumb fence tomorrow. Here's a bunch of before and "almost done" afters...

That's a big job, especially short handed. It looks great.

Yep

[Gabriel]

Got in a little shop time in preparation for a sale we did with the ranch. A couple of my contributions:

[UncleBob]

I built a patio chair today. Will paint tomorrow, Lord willing.

[UncleBob]

Filling cracks, sanding, and painting chair #2.

[FredS]

I really hope I finish this dumb fence tomorrow. Here's a bunch of before and "almost done" afters...

That's a big job, especially short handed. It looks great.

Whoa nellie! Did you just make fun of his stump?